Yahoo! - Let's do a game console with the YAHOO! brand.
Attn. Yoon-Ho Choi
Re: Seat down on a round table with the APOLLO team in order to provide the best
BUSINESS PLAN for the new YAHOO! game console and discuss how to be profitable,
as we have the YAHOO! Brand mark and obviously using it, to do the next gen game
console, intended to cope with the newest 6G of 1 THz band that is being engineered today.
- + -
Re: YAHOO! GAME CONSOLE.
When end users is running a game on a console,
There are a HUGE amount of files to be DOWNLOADED,
from the SERVER side to the CLIENT side.
A files download manager must be provided using A.I. 2.0
A HYPERVISOR TYPE 3 ( Firmware ) to cope with the x86
instructions as the EXYNOS 2022 is a RISC, therefore
the proper x86 need to be translated to the RISC instructions
before be executed, to reach this goal, we will need a
DEDICATED LIBRARY to convert from x86 to the RISC.
A hypervisor enables the host hardware to operate multiple
VMs independent of each other and share abstracted resources
among those VMs.
Virtualization with a hypervisor increases a data
center's efficiency compared to physical workload hosting.
YES! We need the 'HYPERVISOR TYPE 3' at the CLIENT side because
there are a lot of legacy x86 and this could run in a
motherboard with two RISC processors using the proper library.
It is a TYPE 3 that mix TYPE 1 and TYPE 2 features as
this must cope with old x86 legacy from 8088, 80286,
80386, 80486, Pentium, Pentium II, Pentium III, Pentium IV,
i3, i5, i7 and the obvius logic way is using a CLIENT
HYPERVISOR TYPE 3 because there are a DEDICATED LIBRARY
that is used to do translations from an old x86 instruction
to the proper RISC instruction that could be executed
with the EXYNOS 2022 processors.
In the MAINFRAME SIDE, SERVER, To do this the A.I. 2.0
is needed to identify the kind of instruction that will
be run. And as we have two kinds of instructions that are
RISC or x86 to be executed.
I suggest to use the two first bits to classify the kind
of the source code that was the origination.
If the first bit is zero 0 to this is an old x86 instruction
and it need translation to the RISC and the HYPERVISOR TYPE
3 must recognize it and distribute the task to a translator
program to convert to the RISC PATTERN in order to be executed.
if the first bit is one 1 to this is a RISC instruction
so this could be running as if it is RISC and this is a RISC
processor, there are RISC x RISC, and the library is of a
kind dedicated to the RISC ONLY.
00 = x86 instructions set -- PC Legacy --
01 = x86 instructions previously converted to any RISC from APPLE
10 = RISC from any else kind of RISC processor that is not SAMSUNG
11 = RISC from EXYNOS 2022 and could run as EXYNOS 2022 native.
The CLUSTERS in the [SERVER SIDE] can convert x86 from 00 to 01
from PC x86 to an 'APPLE RISC' using a previous processing in
the SERVER SIDE, and send it away to the CLIENT side.
Also the LIBRARIES of the [SERVER SIDE] is so so so so so much
more BIG than our small 2 TB of any SSD storage. The CLIENT
HYPERVISOR needs to recognize as soon as possible the kind
of the code that is entering and do LOCAL CONVERSION to the
EXYNOS 2022 could perform and execute "RUN IT"...
Please don't lost the trolley of the history that is
now passing away.
Please provide a motherboard for two EXYNOS 2200 processors.
Features are as follows:
Who knows 'do the time' and do not hope that it happens.
Researchers believe that AI will play a defining role
in the IoTs and IoBNTs driven world.
The potential shift from 5G to the 6G will be
to determine an efficient way to transmit data.
Softwarization is the term used for the set of interfaces
and protocols which can allow the network to be configured
in software by decoupling the control and user plane.
The user plan usually consists of a set of distributed
and stateless routing tables at which packet switching
is performed at a very high speed.
These tables are updated by the centralized control plan
which maintains the end-to-end routing information for
Data and control management operations are
exchanged between the service consumer and the SDN provider.
SDN provider ultimately forwards the required
service to the service consumer. These services are
controlled by the service consumer by taking acting
on these virtual resources.
6G communication network will cover a large bandwidth
ranging from 3GHz to 60GHz.
Therefore, to enable communication, at any frequency in
this 6G band, the complexity of the hardware circuitry
For each, the communication, antenna, RF filters,
amplifiers have to be designed accordingly.
To cover all the 6G band in next-generation communication
systems, multiple RF and signal processing chains would
be required, which would ultimately increase the
chip size and hardware.
Therefore, a lot of focus needs to be paid to
the field of open research.
The 6G standards by international standardisation bodies
is shown in Fig. 1 with respect to the vision of 6G
International Telecommunication Union Radiocommunication
sector (ITU-R) issued the requirements of International
Mobile Telecommunications-2020 (IMT-2020 Standard) in 2015
for the 5G network standards.
At the same time, 3GPP issued R13 for 5G standards.
It is predicted that ITU will complete the standardization
of 6G (ITU-R IMT-2030) by the end of the year 2030,
whereas 3GPP will finalize its standardization of 6G
ITU has established a focus workgroup for exploring
the system technologies for B5G/6G systems in July 2018.
eugenio d angelo commented
Re: TO INSTALL 'The Customer Relationship Management'.
The consumer has drastically changed his behavior and,
now, it's more demanding than ever.
During quarantine, even those who refused
to buy online were forced to adopt this channel.
More than a year and a half since the beginning of the pandemic,
businesses are slowly reopening and people
They didn't go back to their old routine.
Now, they buy in all available ways and
the brands that are not riding this wave will lose
The first step not to be left behind is to know
the new consumer and their demands.
In my view, he's balancing on top
of a demanding tripod, because:
Got used to the multichannel shopping model.
Will no longer accept bad shipping conditions.
He is loyal to brands that know who he is and what
But how to know if the customer prefers WhatsApp in
instead of the website?
Or if you prefer to pick up the product in the store instead of
welcome you home?
In the physical model, it was easy to get to know the buyer and
establish an intimate relationship with him.
However, for many brands, going omnichannel
it was an overnight transformation.
Many had no experience in the sector and created
a database for each channel, differentiating the
offline and online client.
The problem is that, most of the time, the consumer
who buys in the physical store is the same one who frequents
the online store, so why give it a different treatment
on each channel if it's the same person?
It is no wonder that finding a unified way of
managing customer data has become one of the
retailer's main concerns.
It is in this scenario that Customer Relationship Management
(CRM or Customer Relationship Management) has become
one of the shopkeeper's greatest allies. CRM allows
organize consumer data into a unified basis,
so it's easier to interact with them on multichannel.
Thanks to this tool it is possible to know how much
the customer spends, the frequency he consumes and the value of the
your average purchase ticket.
In practice, CRM allows you to know which channel
most used by the customer, which is the best
kind of like to be contacted and your
In this way, it is possible to personalize the communication, and
offers — such as discount coupons — now have
a logic behind.
The store stops bothering the consumer with offers
useless, strategically sending promotions and
products that are of interest to you.
This significantly increases the chances of
purchase becoming more relevant at the right times.
If one of the main challenges is to sell more,
CRM can be a good way to retain and engage more
with its customers already conquered with a lot of effort.
Building a relationship with the customer is an inherent practice
to retail and with this rapid digitalization it's time
to have that same affection with all its customers.
This customer's journey is mapped in the CRM and
creating personalized campaigns is essential for
reach it regardless of your preferred channel.
So, ready to delight your customers?